The fittings below are specific to Jeep applications. We offer several other fittings as well through our sister site ColdHose.com.

(Link will open in separate Tab/Window)

View products in Grid List
Products Per Page

Tube-O Compressor Suction & Discharge Fittings with R-134a Ports

#FT0168-FT0169$26.99
Tube-O suction and discharge fittings for R-134a refrigerant. The suction fitting has 7/8"-14 threads for the suction hose, and 1"-14 thread for the compressor fitting. The fitting also has a...

# 8 & # 10 Suction & Discharge w- R-134a Ports

#FT0205-FT0206$26.99
O-ring suction and discharge fittings for R-134a refrigerant. The suction fitting has 7/8"-14 threads for the suction hose and compressor fitting. The fitting also has a low side 13mm charge...

# 10 Oring to Flare Adapter

#ATC6243$2.80
# 10 Flare to Oring Adapter

# 8 Oring to Flare Adapter

#ATC6242$2.36
# 8 Flare to Oring Adapter

GM 5.3L 6.0L Compressor Discharge and Suction Block Fittings

#AA2209-AA2210$55.00
Compressor Adapters for Motor Swaps GM 5.3L 6.0L discharge and suction block fittings. Long shank blocks for minimal clearance. Accepts a #8 (3/4" -16) and a # 10 (7/8" -14)...

# 10 Flare To O-ring Adapter

#ATC2609$4.44
# 10 Flare to O-ring adapter. Adapt your old flare fittings to new style 0-ring fittings.

1/2" Under Dash Evaporator Drain Outlet

#5091$1.99
This is a 1/2" Drain outlet that points straight out of the evaporator unit and routes the drain tube down to the floor for the condensation. This drain can be...

# 6 Flare To O-ring Adapter

#ATC2606$2.20
# 6 Flare to O-ring adapter that will allow you to convert your flare fittings to an oring fitting. These fittings are the easiest way to add a new hose...

A-C Hose Bulkhead Fitting

#HP-1029$38.50
Aluminum bulkhead fitting with a #6 and #10 Male Insert Oring Fittings for the suction and liquid line to pass through the firewall.

# 6 Oring to Flare Adapter

#ATC6240$1.84
# 6 Flare to Oring Adapter

GM Compressor Horizontal Block Fitting with #8 and #10 Oring Fittings

#ATC2305$25.00
Compressor Block for Motor Swaps GM Compressor Horizontal Manifold Fits R4, A6 and Sanden Compressors with GV Rear Heads Has #8 (3/4"-16) and #10 (7/8"-14) Male Insert Oring Fittings

Single # 6, # 8, & # 10 Grommet

#G101$0.99
Grommet to get the hoses through the firewall. This grommet will allow you to run all three a/c hose sizes through it without having air pass it. Grommet requires an...

# 8 Flare To O-ring Adapter

#ATC2608$5.81
# 8 Flare to O-ring adapter. This adapteris the simplest way to convert a flare fitting to an oring fitting. If you are changing hosesthat use oring fittings thisadapter will...

1-2" Drain Tube Per Foot

#77-9402$0.99
Drain tube for aftermarket and factory under dash units. The hose is 1/2" and black. The hose connects to the drain on the evaporator units and drains the water from...

A-C and Heater Fitting Straight Bulkhead Fitting

#HP-1028$55.00
Aluminum bulkhead fitting for the firewall that has a #6 and # 10 Male Insert Oring Fittings for the A/C and (2) #10 Male Insert Oring Fittings for the heater...

Oring Compressor #8 90 Female Oring Fitting with High Side Port, Binary Switch and Pigtail

#3-9711KIT$35.00
This is a # 8 90 Degree Female Oring Fitting with high side port. It will screw onto a Sanden oring compressor discharge fitting. It includes a switch port with...

R-134a Discharge Retro Fitting Adapter 7-16" x 20

#V332$2.99
R-134a high side charge port adapter 7/16" x 20. This is a metal adapter with a new valve to convert R-12 to R-134a charging ports. The adapter requires removal of...

R-134a Suction Retro Fitting Adapter 7-16" x20

#V330$2.99
R-134a low side port charge fitting. This is a metal adapter with a valve to convert R-12 to R-134a charging ports. The adapter requires removal of old valve.

#10 Suction Fittings with R-134a Port

#FT0206$14.99
Oring suction side fitting with an R-134a charge port. The fitting has a 7/8"-14 thread for the suction (low side) hose connection, and the compressor fitting. If your compressor has...

A-C and Heater Fitting Square Bulkhead Fitting

#HP-1030$55.00
Aluminum bulkhead fitting for the firewall that has a #6 and # 10 Male Insert Oring Fittings for the A/C and (2) #10 Male Insert Oring Fittings for the heater...

# 12 Oring to Flare Adapter

#ATC6244$5.00
# 12 Flare to Oring Adapter
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page