View products in Grid List
Products Per Page

Commando Heater Core

#19-1433C$57.36
Jeep Dispatcher original replacement heater core. Core Size (H x W x D) 10 1/2 x 6 1/2 x 2 1/2. Inlet: 5/8 and Outlet: 3/4 Factory OE Replacement heater...

Commando Jeepster Heater Core

#19-1429A$53.51
Jeep Commando and Jeepster original replacement heater core. Core Size (H x W x D) 7 x 7 3/4 x 2 1/2 inches. Inlet/Outlet: 5/8 Factory OE Replacement heater core....

Compressor Double V-belt Tube-O

#91-4026$276.32
Brand New Double Groove V-belt Compressor. Used on some aftermarket kits, or can be adapted with a mount kit for use with the original york compressor mount. Compressor is R-12...

Condenser Mount Kit

#CS1000$5.49
Universal condenser mounting kit. The kit includes four straps 1.7" X 6" long with holes every 1/4 inch. The mount kit will make any universal condenser installation easy. Will not...

Cowl Cover for Jeep CJ/YJ

#999-1013$26.99
Cowl Cover for Jeep CJ/YJ This cover is designed to cover the hole when you remove the factory heater core on a CJ/YJ CNC cut from 14 gauge steel These...

Denso 10PA 10S Coil 12 Volt

#CC1100$44.57
Denso 10PA 10S Coil 12 Volt Generic Brand Coil OD 96.4mm Coil ID 61.6mm Mounting ID 40mm Thickness 27.66mm 2 Wire

Denso 10PA/10S Compressor Clutch Coil

#144-2890$35.00
Compressor Clutch Coil Compressor Type: 10PA/10S Coil OD: 96.4mm Coil ID: 61.6mm Mounting ID: 40mm Thickness: 27.6mm Voltage 12V 2 Wires

Denso 10PA/10S Compressor Clutch Coil

#144-2890A$35.00
Compressor Clutch Coil Compressor Type: 10PA/10S Coil OD: 96.4mm Coil ID: 61.6mm Mounting ID: 40mm Thickness: 27.6mm Voltage 12V 2 Wires

Denso 10PA/10S Compressor Clutch Coil

#144-2890B$35.00
Compressor Clutch Coil Compressor Type: 10PA/10S Coil OD: 96.4mm Coil ID: 61.6mm Mounting ID: 40mm Thickness: 27.6mm Voltage 12V 2 Wires

Denso 10PA/10S Compressor Clutch Coil

#144-2890C$35.00
Compressor Clutch Coil Compressor Type: 10PA/10S Coil OD: 96.4mm Coil ID: 61.6mm Mounting ID: 40mm Thickness: 27.6mm Voltage 12V 2 Wires

Dispatcher Heater Core

#19-1429B$53.51
Jeep Dispatcher original replacement heater core. Core Size (H x W x D) 7 x 7 3/4 x 2 1/2 inches. Inlet/Outlet: 5/8 Factory OE Replacement heater core. Due to...

Flare Expansion Valve

#14-9875$19.99
Flare expansion valve for Cj's and Wrangler a/c systems. This is a standard flare valve for a Jeep that did not have oring fittings on the evaporator. The valve can...

Fresh Air Block Off Cap for CJ-5

#CJ-Fresh$7.50
Fresh Air Block Off Cap for CJ-5. If you remove the existing fresh air box assembly from under the dash, this cap will block off the hole and will not...

Fujikoki Oring Expansion Valve

#94-9885$26.99
Oring Expansion Valve Inlet # 6 (5/8"-18) Outlet #8 (3/4"-16) Capillary Length 8"

GM 5.3L 6.0L Compressor Discharge and Suction Block Fittings

#AA2209-AA2210$55.00
Compressor Adapters for Motor Swaps GM 5.3L 6.0L discharge and suction block fittings. Long shank blocks for minimal clearance. Accepts a #8 (3/4" -16) and a # 10 (7/8" -14)...

GM Compressor Horizontal Block Fitting with #8 and #10 Oring Fittings

#ATC2305$25.00
Compressor Block for Motor Swaps GM Compressor Horizontal Manifold Fits R4, A6 and Sanden Compressors with GV Rear Heads Has #8 (3/4"-16) and #10 (7/8"-14) Male Insert Oring Fittings

GM High Side High Flow Line M-15-1.0 Male - M10-1.25 Female

#V114$5.99
Charging Ports / Valves

GM Low Side High Flow Line M13-1.0 Male - Cap M8-1.0 Female

#V112$4.99
GM Low Side High Flow Line M13-1.0 Male - Cap M8-1.0 Female 

GM LS1 LS2 Style Horizontal Offset Raised Face Compressor Block

#AA0442$48.50
GM LS1 LS2 Style Horizontal Compressor Block. #8 Discharge and #10 Suction Oring Fittings. The discharge port has a raised face.

GM LS1 LS2 Style Vertical Raised Face Compressor Block

#AA0443$48.50
GM LS1 LS2 Style Vertical Raised Face Compressor Block. #8 Discharge and #10 Suction Oring Fittings. The discharge port has a raised face.

GM LT Corvette LS3 CVC Vertical Compressor Block

#AA1873$55.00
This adapter will allow you to use the stock compressor on a LT Crate engine, LS-3 engine with an aftermarket air conditioning system. The adapter is designed to fit onto...
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page