All orders are typically shipped within 24-48 hours. UPS Expedited shipping cutoff is 3pm Eastern Time M-F

The air conditioning adapter fittings below are specific to Jeep applications. We offer several other AC compression fittings as well through our sister site ColdHose.com.

(Link will open in separate Tab/Window)

View products in Grid List
Products Per Page

Tube-O Compressor Suction & Discharge Fittings with R-134a Ports

Tube-O suction and discharge fittings for R-134a refrigerant. The suction fitting has 7/8"-14 threads for the suction hose, and 1"-14 thread for the compressor fitting. The fitting also has a...
$26.99

# 8 & # 10 Suction & Discharge w- R-134a Ports

O-ring suction and discharge fittings for R-134a refrigerant. The suction fitting has 7/8"-14 threads for the suction hose and compressor fitting. The fitting also has a low side 13mm charge...
$26.99

# 10 Oring to Flare Adapter

# 10 Flare to Oring Adapter
$3.76

# 8 Oring to Flare Adapter

# 8 Flare to Oring Adapter
$3.04

GM 5.3L 6.0L Compressor Discharge and Suction Block Fittings

Compressor Adapters for Motor Swaps GM 5.3L 6.0L discharge and suction block fittings. Long shank blocks for minimal clearance. Accepts a #8 (3/4" -16) and a # 10 (7/8" -14)...
$55.00

1/2" Under Dash Evaporator Drain Outlet

This is a 1/2" Drain outlet that points straight out of the evaporator unit and routes the drain tube down to the floor for the condensation. This drain can be...
$1.99

# 6 Flare To O-ring Adapter

# 6 Flare to O-ring adapter that will allow you to convert your flare fittings to an oring fitting. These fittings are the easiest way to add a new hose...
$2.72

# 10 Flare To O-ring Adapter

# 10 Flare to O-ring adapter. Adapt your old flare fittings to new style 0-ring fittings.
$5.50

# 6 Oring to Flare Adapter

# 6 Flare to Oring Adapter
$2.08

Single # 6, # 8, & # 10 Grommet

Grommet to get the hoses through the firewall. This grommet will allow you to run all three a/c hose sizes through it without having air pass it. Grommet requires an...
$1.05

# 8 Flare To O-ring Adapter

# 8 Flare to O-ring adapter. This adapteris the simplest way to convert a flare fitting to an oring fitting. If you are changing hosesthat use oring fittings thisadapter will...
$5.81

GM Compressor Horizontal Block Fitting with #8 and #10 Oring Fittings

Compressor Block for Motor Swaps GM Compressor Horizontal Manifold Fits R4, A6 and Sanden Compressors with GV Rear Heads Has #8 (3/4"-16) and #10 (7/8"-14) Male Insert Oring Fittings
$25.00

Oring Compressor #8 90 Female Oring Fitting with High Side Port, Binary Switch and Pigtail

This is a # 8 90 Degree Female Oring Fitting with high side port. It will screw onto a Sanden oring compressor discharge fitting. It includes a switch port with...
$45.00

Jeep TJ Accumulator Drier Pad Adapter Fitting Set

Pad Adapter Fitting Set These pad fittings will connect to an accumulator drier from a 1999-2006 Wrangler TJ and will allow you to make aftermarket hoses for a motor swap....
$75.00

1-2" Drain Tube Per Foot

Drain tube for aftermarket and factory under dash units. The hose is 1/2" and black. The hose connects to the drain on the evaporator units and drains the water from...
$0.99

Peanut Style GM Sanden SD7 Compressor Discharge and Suction Block Fitting Set

Peanut Style Discharge and Suction Block Fittings Fits: Sanden SD7B10 7176
$59.50

# 12 Oring to Flare Adapter

# 12 Flare to Oring Adapter
$5.00

R-134a Discharge Retro Fitting Adapter 7-16" x 20

R-134a high side charge port adapter 7/16" x 20. This is a metal adapter with a new valve to convert R-12 to R-134a charging ports. The adapter requires removal of...
$3.99

R-134a Discharge Retro Fitting Adapter 3-16"

R-134a high side charge port adapter 3/16". This is a metal adapter with a new valve to convert R-12 to R-134a charging ports. The adapter requires removal of old valve.
$3.99

A-C Hose Bulkhead Fitting

Aluminum bulkhead fitting with a #6 and #10 Male Insert Oring Fittings for the suction and liquid line to pass through the firewall.
$38.50

R-134a Suction Retro Fitting Adapter 7-16" x20

R-134a low side port charge fitting. This is a metal adapter with a valve to convert R-12 to R-134a charging ports. The adapter requires removal of old valve.
$3.99
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page