All orders are typically shipped within 24-48 hours. UPS Expedited shipping cutoff is 3pm Eastern Time M-F

LIMITED TIME ONLY: FREE SHIPPING ON ALL ORDERS OVER $25 48 STATES

The fittings below are specific to Jeep applications. We offer several other fittings as well through our sister site ColdHose.com.

(Link will open in separate Tab/Window)

View products in Grid List
Products Per Page

Tube-O Compressor Suction & Discharge Fittings with R-134a Ports

Tube-O suction and discharge fittings for R-134a refrigerant. The suction fitting has 7/8"-14 threads for the suction hose, and 1"-14 thread for the compressor fitting. The fitting also has a...
$26.99

# 8 & # 10 Suction & Discharge w- R-134a Ports

O-ring suction and discharge fittings for R-134a refrigerant. The suction fitting has 7/8"-14 threads for the suction hose and compressor fitting. The fitting also has a low side 13mm charge...
$26.99

# 10 Oring to Flare Adapter

# 10 Flare to Oring Adapter
$3.76

# 8 Oring to Flare Adapter

# 8 Flare to Oring Adapter
$3.04

GM 5.3L 6.0L Compressor Discharge and Suction Block Fittings

Compressor Adapters for Motor Swaps GM 5.3L 6.0L discharge and suction block fittings. Long shank blocks for minimal clearance. Accepts a #8 (3/4" -16) and a # 10 (7/8" -14)...
$55.00

1/2" Under Dash Evaporator Drain Outlet

This is a 1/2" Drain outlet that points straight out of the evaporator unit and routes the drain tube down to the floor for the condensation. This drain can be...
$1.99

# 10 Flare To O-ring Adapter

# 10 Flare to O-ring adapter. Adapt your old flare fittings to new style 0-ring fittings.
$5.50

# 6 Flare To O-ring Adapter

# 6 Flare to O-ring adapter that will allow you to convert your flare fittings to an oring fitting. These fittings are the easiest way to add a new hose...
$2.72

# 6 Oring to Flare Adapter

# 6 Flare to Oring Adapter
$2.08

Single # 6, # 8, & # 10 Grommet

Grommet to get the hoses through the firewall. This grommet will allow you to run all three a/c hose sizes through it without having air pass it. Grommet requires an...
$1.05

# 8 Flare To O-ring Adapter

# 8 Flare to O-ring adapter. This adapteris the simplest way to convert a flare fitting to an oring fitting. If you are changing hosesthat use oring fittings thisadapter will...
$5.81

Oring Compressor #8 90 Female Oring Fitting with High Side Port, Binary Switch and Pigtail

This is a # 8 90 Degree Female Oring Fitting with high side port. It will screw onto a Sanden oring compressor discharge fitting. It includes a switch port with...
$45.00

GM Compressor Horizontal Block Fitting with #8 and #10 Oring Fittings

Compressor Block for Motor Swaps GM Compressor Horizontal Manifold Fits R4, A6 and Sanden Compressors with GV Rear Heads Has #8 (3/4"-16) and #10 (7/8"-14) Male Insert Oring Fittings
$25.00

Jeep TJ Accumulator Drier Pad Adapter Fitting Set

Pad Adapter Fitting Set These pad fittings will connect to an accumulator drier from a 1999-2006 Wrangler TJ and will allow you to make aftermarket hoses for a motor swap....
$75.00

1-2" Drain Tube Per Foot

Drain tube for aftermarket and factory under dash units. The hose is 1/2" and black. The hose connects to the drain on the evaporator units and drains the water from...
$0.99

# 12 Oring to Flare Adapter

# 12 Flare to Oring Adapter
$5.00

A-C Hose Bulkhead Fitting

Aluminum bulkhead fitting with a #6 and #10 Male Insert Oring Fittings for the suction and liquid line to pass through the firewall.
$38.50

R-134a Discharge Retro Fitting Adapter 7-16" x 20

R-134a high side charge port adapter 7/16" x 20. This is a metal adapter with a new valve to convert R-12 to R-134a charging ports. The adapter requires removal of...
$3.99

#10 Suction Fittings with R-134a Port

Oring suction side fitting with an R-134a charge port. The fitting has a 7/8"-14 thread for the suction (low side) hose connection, and the compressor fitting. If your compressor has...
$14.99

A-C and Heater Fitting Square Bulkhead Fitting

Aluminum bulkhead fitting for the firewall that has a #6 and # 10 Male Insert Oring Fittings for the A/C and (2) #10 Male Insert Oring Fittings for the heater...
$55.00

R-134a Discharge Retro Fitting Adapter 3-16"

R-134a high side charge port adapter 3/16". This is a metal adapter with a new valve to convert R-12 to R-134a charging ports. The adapter requires removal of old valve.
$3.99
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page